닫기

Technical AbilityComputer Integrated Automation System

production process

step.01soil mulch removing process

As the process of crushing, blending, aging and mixing the raw materials such as loess, clay and kaolin in uniform size to match the characteristics of the product, it is the primary processing step of the solil to increase the uniformity and strength of a product.

  • Original soil field
  • Wet pan mill
  • Silo
  • High speed roller mill

step.02molding process

A process of making products of different specifications and shapes, such as red clay bricks, red clay pavement bricks, molded bricks, etc. by extruding at ultra-high pressure while keeping raw materials processed in a vacuum state in a certain size in the soil mulch removing process

  • Vacuum extruder
  • Multi-wire cutter
  • Molding completion

step.03drying process

As a process of recovering vast amount of cooling heat generated in the firing furnace and drying the moisture contained in the product for about 70 hours while maintaining the temperature at about 100°C, it controls the temperature, humidity, air volume and wind speed to remove moisture up to 2% of the product and completes drying without cracking or deformation.

  • Drying carriage loading
  • Drying room
  • Cooling heat recovery system

step.04firing process

The required amount of heat before heating is recovered from the cooling zone, preheated so that the sintering can be performed smoothly, and the sintering is carried out by increasing the temperature gradually to 1,250°C. The sintering zone is the section that makes a final finished product, which determines the strength, absorption and color of the product and maintains uniform temperature distribution in the sintering furnace so that a certain product can be produced. Thereafter, the product is completed by quick cooling and slow cooling at the cooling zone.

  • Sintering carriage loading
  • Sintering furnace
  • Control room
  • Sintering completion

step.05packing process

As the final step of the process, the standard and color are carefully selected and managed by thorough quality control, and the product is automatically packaged by the robot and ready for release. In order to complement the problems that may arise, we carry out the visual inspection process in parallel to supply the products of perfect quality to the consumers.

  • Packing robot
  • Packing robot
  • Finished product

SamhanC1

  • add.[41228] 99, Dongbu-ro, Dong-gu, Daegu, Korea
  • tel.+82-1599-9989
  • fax.+82-53-655-0679
  • mail.sh@ebrick.co.kr

copyright(c)2018 samhan c1 all right reserved.